How to Increase Steam Pressure in a Water Boiler-Step by Step

A water boiler is an electronic device that boils water to a particular temperature with some level of steam pressure. Increasing the steam pressure in a water boiler helps the water boiler to work perfectly. However, sometimes the steam pressure gradually decreases due to excessive pressure that might damage the valves as some expand due to heat in the boilers.

Therefore, increasing the steam boiler in a water boiler is a vital precaution to follow since it maintains the water boilers and regularly cleans the boilers for a long-term purpose. The information below shows how to increase steam pressure in a water boiler.

Steps to follow when increasing steam pressure in a water boiler

how to increase steam pressure in a water boiler

Water boilers exist in different models depending on the manufacturer’s design and model. Therefore, it is crucial to carefully follow the manufacturer’s instructions to avoid damaging the water boiler when increasing steam pressure. The following information shows different methods of increasing steam pressure in a water boiler. Follow the steps carefully to get accurate results.

There are two methods of increasing steam pressure in water boilers. Below are the methods and steps one can respectively follow to increase steam pressure in the water boiler:

Method 1: Increasing steam pressure in a water boiler using a loop to fill

Increasing steam pressure in a water boiler using a loop to fill

The first method of increasing steam pressure in water boilers is by using a loop to fill. The steps below show how to carry out the refilling process using a loop.

1.Turn off the water boiler

Before increasing pressure in the boiler, switch off the boiler. Next, allow the boiler to sit for a couple of minutes after low-pressure signs show up. Finally, leave the boiler to contract and cool down to prevent the occurrence of burn accidents.

2. Confirm if the filling loop one wants to use is working

Inspect the condition of the loop. Test the loop if it is functioning as required. If the loop has some faults, consider troubleshooting the faults before increasing steam pressure in the water boiler. Also, consider using a new loop if the loop is distorted beyond repair, and the loop must be of high quality and suits your water boiler.

3. Disclose the valves in the radiator

After confirming the condition of the filling loop, disclose the water boiler valves. Open the vales carefully to avoid damaging other parts of the water boiler. Leave the valves open until the steam pressure reaches the desired level. Finally, close the water boiler valves. Ensure you close the valves each time to ensure the increasing steam pressure process is successful.

4. Turn on the water boiler

After fixing the issues with the filling loop, turn on the boiler to eliminate any problem. Next, test the water boiler to see if it is functioning as recommended. If the water boiler fails to perform as required, repeat the process.

5. Remove the filling loop.

Finally, remove the filling loop in the water boiler gently without applying too much pressure that can damage the loop, then clean it well and place it in a safe container or use for its use in the future. When cleaning the water boiler, ensure you use the correct detergent recommended by the manufacturer.

Method 2: Increasing team pressure in a water boiler using a key to add pressure

Increasing team pressure in a water boiler using a key to add pressure

In method two, the equipment required includes a water boiler key.

1. Turn the water boiler off

Switching off the water boiler. Switching the boiler gives the user humble time, especially when handling the boiler.

2. Find the key for increasing steam pressure

Since a key is to add pressure to the water boiler, find the key and the slot just under the water boiler. The key is necessary when opening the water boiler.

3. Place the key in a slot in the water boiler.

Use the key after location, insert it in the lot, and make sure it opens the lock in the boiler. Repeat the process until you hear the flow of water into the water boiler.

4. Remove the key from the boiler

After attaining the pressure that the boiler needs, remove the key from the slot.

5. Turn on the water boiler

Turning on the water helps see the proper function of the boiler after increasing the steam pressure.

Causes of increasing steam pressure in a water boiler

Causes of increasing steam pressure in a water boiler

Sometimes a water boiler may have low pressure, thus failing to heat water to its boiling point. The only way of troubleshooting such a problem is by increasing the steam pressure in the water boiler. Moreover, reduction in pressure of water boilers results from the following issues:

  • Open and leaking water boiling system

Open and leaking water boiling systems may lead to an increase in steam pressure in water boilers. To troubleshoot such problems, first, increase steam in the water boilers. If a decrease in steam pressure results from a leaking boiling system, repair the parts using recommended tools and test if the water boilers function perfectly. If the boiling systems are entirely damaged, consider replacing them with new ones.

If the leaking problem persists, consider contacting a licensed technician to help you fix or replace the boiling system. Finally, when troubleshooting the leaking boiling system, refer to the manufacturer’s manual on the best steps of resolving the leaking or loose water boiling system.

  • Radiators that release gases and water from the valve

When valves in the radiator start releasing gases, the pressure decreases, thus hindering the water boiler from heating water as usual. The only way of troubleshooting the damaged radiator is by replacing the radiator with the new one.

To check such a problem, confirm the pressure from the valves in the water boiler system keenly. If you fail to recognize the issue, check instructions in the manufacturer’s manual reference manual or use a search engine.

Conclusion

Sometimes, you may wish to increase steam pressure in the water boiler. Luckily, the article shows different methods to increase steam pressure in the water boiler using a loop and the other using a key. Therefore, it is advisable to choose the best way that matches your preference.

Finally, if you find it challenging to increase steam pressure in a water boiler, seek help from an experienced person. Further, ensure you clean your water boiler regularly using recommended detergent. Also, remember to follow the manufacturer’s instructions carefully when increasing steam pressure in the water boiler.

To Increase Steam Pressure in a Water Boiler, Watch this video below;

Leave a Reply

Your email address will not be published.

Recent Posts