Insteon Hub Scenes Not Working – Ways to Fix

Insteon Hub is the remote control technology that keeps all the devices connected for home automation. This is one of the most exciting additions to your smart home. 

But, if there’s an issue with the Insteon Hub, then the whole system of your smart home may face several problems. 

Insteon hub scenes not working is one of the most common problems faced by most users. We know, you have come here facing this particular issue.

No worries man. Today, we’re going to note a step by step solution. Hopefully, by the end of this article, you will know the ways of fixing problematic Insteon hub scenes.

How does an Insteon Hub work?

To function, first and foremost,  an Insteon Hub has to be connected with the router. And, all home automation devices communicate with the Insteon hub over a proprietary Wi-Fi connection. Insteon hub utilizes your house’s regular power connection cables as well to circulate signals.

The Insteon hub system lets you regulate and handle home devices by your tab or smartphone. Plus, the hub can make schedules and multiple-unit scenes.

Causes of Insteon hub scenes not working?

Insteon Hub Scenes Not Working
source: https://theiotpad.com/

There are some reasons why Insteon hub scenes are not found. These are as follows: 

  1. No internet connection or poor internet connection. 
  2. Your modem or router is not being able to work appropriately.
  3. If your Insteon hub gets disconnected from the ethernet or power cable net. 

How to fix Insteon hub scenes?

How to fix Insteon hub scenes?

To troubleshoot the Insteon hub scenes, luckily there are few easy fixes. Just read below steps and follow them step by step.  

Step 1: The first and foremost thing you have to ensure whether the hub has a connection with the power outlet or not. 

Step 2: Then, inspect the ethernet wire. At the same time, you should also check the wire keeping plugged and unplugged. 

Step 3: Check the router’s electricity connection. Keep it connected to a power source. Then, inspect the net connection by searching a site.

Step 4: Now, it’s time to check both the smartphone and Insteon Hub. Make sure that both of them are linked to a similar wireless network.

Step 5: Reboot the Insteon Hub after disconnecting the power cable. Please wait 30 seconds before restarting the hub. 

Step 6: At last, start the router and modem again. Now, make sure that they are working perfectly. 

If those steps are likely to not be working out, then there might be something else creating the problem. In that case, you should configure your Insteon Hub once again. 

Good news for you! Amazon comes with a lot of handy Insteon hubs that you may purchase when needed. 

How to set up and configure Insteon Hub?

How to set up and configure Insteon Hub
source: https://www.ebay.com/

 

To get your Insteon hub connected with the router, you have to first connect the power and ethernet cable. Then maintain the below steps to set up and complete the configuration of your Insteon hub.  

Step 1: Make sure that both your Insteon hub and the smartphone have a similar Wi-Fi connection. 

Step 2: Then, go to your app store and download the Insteon app. After installation, make an account on the app. 

Step 3: Choose the Help option. After that, browse through the option “My Hub Doesn’t Have A QR Code.”

Step 4: Once the configuration and set up is done, the Insteon app will get the connection to your hub. 

When you have the Insteon Hub (2014), you may scan the QR code and get the app connected with your hub.   

Thus, you should be able to set up and configure your Insteon hub. 

How to update my Insteon Hub?

Your Insteon hub can be updated by pressing the Update Hub button. You’ll find the option at Edit House in Settings.

How can I access my Insteon Hub?

To access your Insteon hub, first of all, go to the Insteon Connect option. Then, browse over a similar network that is connected to your hub. Visit the link: insteon.com/getinfo.asp

In this way, your Insteon hubs will be able to connect to the Insteon Servers within the next 24 hours.  

How to reset the Insteon Hub(2014)?

There are some simple steps you have to take and reset your Insteon hub. 

Step 1: Unplug the Hub from the power connection.

Step 2: Then, touch the set button and hold it until the reconnecting power supply goes. The Hub tends to release a high beep.

Step 3: Once the high beep sound stops, stop holding the set button. 

Step 4: At last, refund the power supply by unplugging and replugging the Insteon hub to a power source.

Conclusion

The article has tried to let you know the easy fixes of the Insteon hub scene issues. In doing so, you may face several unwanted problems. Firstly, please follow the step by step guide. 

Hopefully, coming to the end of this article, you can fix your faulty Insteon Hub scenes on your own.

Leave a Reply

Your email address will not be published.

Recent Posts