Maytag Dishwasher Troubleshooting Guide & How to Guide

Dishwashers play a core part in your kitchen. If you detest washing dishes, this machine does the work for you very easily. Maytag deliver excellent kitchen appliances and hence ensure that you get the best possible dishwasher to help out in the kitchen. You will easily notice when your dishwasher is not performing normally because it is an appliance that you use on a daily basis.

There may be leakages, bad odors, poor draining or it may not power on in other cases. This should alert you that there is a problem with your machine which needs your attention. So, after identifying the problem, it is essential that you carry out troubleshooting to correct it. In this article, you will find the Maytag dishwasher troubleshooting guide to help you through.

What may cause your dishwasher to stop operating?What may cause your dishwasher to stop operating

If your dishwasher is not running, there are things you need to check first. They are not really problems but mistakes that can be easily rectified.

  • Water supply is off

Is the water supply to your dishwasher on? Check for this beforehand. If it is not on, your machine will not function. Therefore, turn it on and try and see if the dishwasher functions. You can check the manual to find out how to do this correctly.

  •  Control lock is on

Every dishwasher comes with a control lock that prevents one from unnecessarily accessing it when not in use. When it is on, all the buttons remain deactivated. Also, once the wash cycle is on, this lock ensures that no extra changes take place until the cycle is complete.

Thus, check whether the control lock is on and turn it off to get your dishwasher running. Do this by pressing and holding the lock button for 5 seconds till the light turns off.

  • Dishwasher set to sleep mode

You may accidentally set your machine to sleep mode or it does this on its own. When in sleep mode, it will not operate until you change this mode which protects against undesired dishwasher use. To disable it, press ‘cancel’, or ‘resume’ or ‘start’. Also, open the dishwasher door then close it.

  •  Delay wash option

If you set your dishwasher to the delay wash option and then forget, your washer will not operate till the time you set reaches. To cancel the delay, select the options of ‘drain’ or ‘cancel’. After canceling, press the ‘resume’ or ‘start’ button to restart the washing cycle.

  • Leaving the door open

Locking the dishwasher door completely is very necessary because if you do not, it will not run. Besides, check that the installation of the dish rack on the lower side is correct. Failure will cause the door not to latch properly.

  • Resetting dishwasher

At times, your dishwasher may be dealing with many commands at once and gets tired, just like your smartphone or computer. Hence, it needs a quick reset to reactivate it. So, how do you go about this? Simple! Unplug it from its source of power for about 60 seconds then plug it back. It is reset and you are good to go!

Common problems associated with Maytag Dishwashermaytag dishwasher troubleshooting

After correcting the mistakes above and your dishwasher is still not operating, there is a bigger problem but not so big. It is time to keenly observe your washer and identify some of the problems it may be encountering.

1. Check the filter of your dishwasherCheck the filter of your dishwasher

Dishwashers have filters that sieve out dirt from your utensils. There are bigger particles and paper that remain in your filter and end up clogging it. This will prevent water from draining and cause the washer not to perform like it should.

Locate the filter at the base of your filter and remove it either by hand or using a screwdriver depending on the model. You will see the food particles in the filter. Get some warm water and a light brush, most preferably a toothbrush and use it to clean the clog off the filter. Return your clean filter to its original position and run the dishwasher to see if it works right.

2. LeakagesLeakages

When your dishwasher starts leaking, you will easily notice because it is something rather obvious. You should be able to identify what is causing the leakage. If you do not know how, here are some tips for you;

  • Check the connection of pipes at the back of your dishwasher and ensure that they are well secured. Poor pipe connection is likely to cause a leakage.
  • If your utensils are not arranged in an organized manner inside the racks of your dishwasher, a leakage may occur. Similarly, do not cram a lot of dishes in the washer. All in all, ensure to organize your dishes in the trays to avoid leaking.
  •  Do not put too much detergent in your dishwasher as it will bring about a leak. Moreover, use detergent that is only meant for the machine and not any other regular soap which may spill over to the tub and cause leakage.
  •  Ensure the seal on the door of your washer is not worn out or rusty. If this is the case, then there will definitely be a leak. Replace the old seal with a new one to be safe.

3. Too much noiseToo much noise

Your machine may produce some annoying noises while it is running and this indicates that something is not right. First, ensure that the machine sits on a level surface. This way, there will be no noises.

Secondly, some parts of the washer may be faulty, loose or worn out which makes them produce some type of sound. You can check to confirm such parts or call a professional and replace them.

In the case that you arrange your utensils haphazardly in your dishwasher, they will tend to produce some weird sound. The right thing to do is to properly organize them.

4. Dishes are still dirtyDishes are still dirty

The moment you notice that your dishes still come out of the dishwasher dirty, then the way you organize them inside the machine is the problem. The dishwasher has trays for arranging your utensils thus arrange them one by one and not pile them together. If you cram them together, some of them will not come into contact with water and detergent. They will remain dirty.

5. Dishwasher not drainingmultimeter

If your dishwasher does not drain properly, there is a problem with its drainage. After each wash cycle, check the water remaining in the tub. Some little water is okay, but if there is a lot of it, the dishwasher’s drainage is faulty.

The drain hose may have some blockages or the drain motor is defective. In such case scenarios, you should involve the services of a professional.

But if you want to go the DIY way, here are the steps to follow;

  • Use a screwdriver to remove the screws that attach the washer to its bottom and countertop.
  •  If the valve that supplies water is on, turn it off.
  •  Locate the drain hose and disconnect it.
  • Check to ensure that the hose does not have any twists. If present, try and straighten it. Remove the clogs if there are any by flushing it with water that has lots of pressure.
  • When done, connect the drain hose once again and turn on the valve supplying water.
  •  Get the dishwasher back in position and tighten the screws around it.
  •  Run the cycle and see if the water will drain as required.

You can test the continuity of the motor of your drain pump using a multimeter. If it has no continuity, you have no option other than replacing it.

6. Bad odorvinegar

Your dishwasher may be producing bad odor. This is because of the food residues that stick in the machine over a period of time. It is very easy to deal with this issue. All you need to do is clean your machine using vinegar.

Take two containers that are dishwasher safe and fill them up with vinegar. Put them on your dishwasher’s bottom rack. Use the air dry option on the machine and run a standard cycle. Do not use any detergent during this operation.

After the cycle is complete, use a mushy piece of cloth to wipe the machine’s interior to get rid of any rubble. Then add detergent and run the cycle again. After this, you will no longer smell any bad odors from your dishwasher.

If all the troubleshooting options above do not work for your dish washing machine, it is time to call a professional to perform a service check or you can as well upgrade your machine to a better Maytag dishwasher.

Conclusion

Maytag dishwasher troubleshooting guide helps you to get your machine up and running in case it experiences a relapse. Once you identify where the problem is, getting a solution is stress free unless in cases where there is need for a professional opinion. We hope that you find this article helpful when it comes to maintaining your dishwasher.

Leave a Comment