What Does Hold Mean on a Honeywell Thermostat?

Honeywell thermostats have been in the industry for a long time. They have automatic features that help the user reduce errors when using and controlling the heating, ventilation, and air conditioning system. One will always want to set the thermostat and forget about it despite the number of features that it offers.

In some cases, you may want to change the schedule and the thermostat settings. The schedule change will force you to reset the thermostat’s setting and reset it back to restore factory settings. In the resetting is where the hold-on button stays in hand. The hold is a temporary control that helps you to make instant changes.

What does hold mean on the Honeywell thermostat?

What does hold mean on the Honeywell thermostat

The hold message on a Honeywell thermostat instructs the thermostat to maintain the heating, ventilation, and air conditioning system for building the required temperature. The set temperature will remain unchanged until the expiry of the hold or when the temperatures of the thermostat are changed manually. The settings of the thermostat determine whether a hold will be either temporary or permanent.

The programmable thermostats can schedule a heating and cooling system. Therefore, the thermostat can heat and cool at certain times as set by the user. Giving the thermostat schedules on what to do and when helps keep the house more comfortable, and it also saves the energy bills since the thermostat will only be working when one is at home. 

When one sets the hold on the thermostat button, it instructs the thermostat to ignore the usual schedule that it is followed and follow the temperatures that have been set based on the hold setting. Hold in the Honeywell thermostat overrules the initially set temperatures. A permanent hold usually doesn’t run out by itself; it will set the hold settings permanently unless it is manually changed.

A temporary hold expires depending on the holding settings. It will keep the set temperature constant for a certain period, after which the thermostat will renew its regular operating schedule. In any case, one will want to cancel a temporary hold; you need to adjust the thermostat’s set temperature manually.

A Honeywell thermostat has a feature whereby you can raise or lower the temperature settings during a hold, depending on your preferences. The Honeywell thermostat has the plus and the minus buttons that are used to adjust the temperature. The temporary hold is also known as the hold since it works according to the hold settings.

To select a permanent hold in some Honeywell thermostats, consider clicking on the permanent hold button. In the Honeywell thermostats, you might also find the run schedule option. A run schedule option is an option used to cancel a hold and bring about the resumption of a regular schedule. The run schedule feature is not available in all the thermostats but a few.

You might be interested to read also: How to Remove Old Honeywell Thermostat From Wall

How to deactivate a temporary hold

How to deactivate a temporary hold

When having a temporary hold, you can deactivate it any time you wish to switch back to the original programmed schedule. When deactivating the hold, press the appropriate button depending on the Honeywell thermostat model that you are using. The following are the different kinds of options you can find in your thermostat and help remove the hold.

  • Run button
  • Cancel button
  • Use schedule
  • Remove hold
  • Run schedule
  • Cancel hold options

If you have not fixed the problem, or you didn’t get the steps to deactivate the hold, use the user that came with the Honeywell thermostat for better guidelines.

Deactivating a permanent hold

Deactivating a permanent hold

Deactivating the permanent hold on the Honeywell thermostat is similar to deactivating the temporary hold. However, before turning the hold-off, it is a must to unlock the Honeywell thermostat. In some other models, there will be a bit different functioning of the thermostat. For example the T4 pro model, one will have to press the up or down button first, then the remove hold button.

In a lyric T5 Wi-Fi thermostat, turning off the hold is done by pressing the permanent hold and, finally, the run schedule. If you are not figuring it out, always refer to the user’s guide with the thermostat.

Advantages of the hold

Advantages of the hold

The hold feature in the Honeywell thermostat is essential in that it helps you stay away from the temperature schedule that is programmed. There are different scenarios when you need to use the hold feature in the thermostat. For example, it can be used when there are visitors in your house who prefer the room colder or even warmer than the usual room temperatures.

The hold function is also proper when one is going for a vacation. The person will set the hold function so that the thermostat will be idle all the time when they are away. The hold function in such a case will help in reduction in the energy costs.

Frequently asked questions:

  • How can one reset the Honeywell thermostat?

The following are the steps that one can use to reset the Honeywell programmable thermostat.

1) Switch off the thermostat.

2) Open the battery door by inserting a coin into the slot.

3) Take off the batteries.

4) Ensure that you insert the batteries backward. The positive terminal of the battery should line up with the negative pole.

5) Remove the batteries again and correctly reinstall them.

6) Close the battery door.

Conclusion

In conclusion, the hold function in the Honeywell thermostat is a good way of overturning the standard programming. Switching the setting on and off is simple as it involves one or two presses. It is essential to take advantage of this feature to ensure that the energy costs and the bills are saved. The hold feature gives you an advantage of convenience and helps to do faster changes in the temperature at home.

In general, the Honeywell thermostat is programmed to change the room temperature at certain levels at different hours based on the schedule. Nevertheless, if the thermostat’s temperature needs to be changed temporarily, one can use the permanent and the temporary hold features. Finally, follow the manufacturer’s instructions when using the Honeywell thermostat.

Leave a Reply

Your email address will not be published.

Recent Posts