How To Reset White Rodgers Thermostat Reset – User Guides

White Rodger thermostats remain the most commonly used models out there. These gadgets are significant to maintain the temperature whenever the owners aren’t around. People with thermostats tend to come home expecting either a cool or warm house. However, sometimes these devices are associated with a lot of dysfunctions that require a rest. 

But how can one correctly reset a White Rodgers Thermostat? Don’t worry because the article has appropriate answers to this question. Therefore, to reset your device, it’s advisable to understand the model you’re using. For example, resetting old models is straightforward as you only need to hold the time key, down, and up arrow simultaneously. 

Resetting modern models can be a bit challenging but below are user guides for various models. What you need is to identify your model and follow the resetting instructions. Let’s get into serious business.

How To Reset White Rodgers Thermostat Reset: What Is Your Model?How To Reset White Rodgers Thermostat Reset

The reset user guide you choose should depend on the type of thermostat you’re using. You can quickly know your model by checking on the thermostat back. Knowing the model helps you to apply correct instructions.

Furthermore, you will have to uncover the thermostat plate to see the model you’re using. You don’t want to have any tool to remove the plate; pull off using your bare hands. 

1. Emerson Thermostat 80 Series

Instructions under this category can apply on various models like; 

  • 1F85U-22NP
  • 1F85U-42NP
  • 1F83C-11PR
  • 1F85U-42PR
  • 1F83H-21NP
  • 1F83H-21PR
  • 1F83C-11NP
  • 1F85U-22PR

Factory reset steps 

Step 1: Initiating the reset. Here, it would help if you held menu and backlight buttons to kick off the reset process. 

Step 2: Observe the screen. The screen will go blank and come back again after 3 or 5 seconds. Once you see the lit display, know the process is over and successful. 

Hard reset steps

If the thermostat screen fails to respond, try to change the batteries. Experts affirm that replacing the battery(s) can be an appropriate solution to fix the issue. 

Sometimes the screen may be unresponsive or blank; remove the plate before replacing the batteries. This art shouldn’t affect the configuration or schedule. If this action fails; unresponsive screen, then you will have to seek the help of an expert to replace the thermostat. 

2. Blue Series 2-inch Emerson ThermostatBlue Series 2-inch Emerson Thermostat

The model under this category include;

  • 1F89EZ-0251
  • 1F80-0261
  • 1F86EZ-0251
  • 1F82-0261
  • 1F89-0211
  • 1F80-0224

Factory reset (method 1)

Step 1: Queuing the reset. Press down and up arrows while holding the “prgm” button. The display will go off.

Step 2: Observe the screen. All the settings clock and settings will be reset when the display comes back.

Factory reset (method 2)

  1. Adjust the switch. It has to be in Emer, cool, or heat before proceeding.
  2. Press the down or up button while holding the “time” button simultaneously. 
  3. Observe the screen. Once the display comes back, know the reset process was successful.

3. Blue Series 4-inch Emerson ThermostatBlue Series 4-inch Emerson Thermostat

 Models under category include;

  • 1F83-0471
  • 1F85-0422

The above two models are programmable and non-programmable. However, they are both integrated automatic and universal, best for heating and cooling. 

Configuration and schedule reset (steps)

Step 1: Initiating the reset process. Press the down or up button and fan button simultaneously.

Step 2: Observe the screen. The screen goes blank and pops up again; it has bees reset.

Hard reset (steps)

Step 1: Uncover the thermostat. Use your hands to do this; no tools

Step 2: Disconnect the Circuit. Stop the power flow by disconnecting the circuit. 

Step 3: Detach the C and R wires. Don’t collect them together

Step 4: Remove the batteries. Wait for about two minutes before removing the batteries. The thermostat will reset after 2 ½ minutes. 

Step 5: Reinstalling the components. Ensure the C and R wires are correctly fixed to their terminals. Also, remember to return the cover plate and batteries.

4. Blue Series 6-inch Emerson Touchscreen ThermostatBlue Series 6-inch Emerson Touchscreen Thermostat

This model comes with a massive touchscreen and is perfect with heat pump units, multistage and single systems. 

The models that fall under this category include;

  • 1F9EZ-0671
  • 1F95-0680
  • 1F95-0671

Resetting configuration and schedule –steps 

Step 1: Queuing the reset process

This step is simple as you only have to hold them down or up arrow and the system or fan button simultaneously. Press until the screen goes blank. 

Step 2: Watch out the screen  

After the screen going asleep for a while, it will come back with a clock, all settings, and a schedule. The reset process is successful. 

Hard Reset Instructions

If your thermostat’s screen is not functioning correctly, a hard reset is necessary. 

Step 1: Uncover the thermostat

Start by disconnecting the wires from the C and R terminals or RC and RH. Make sure they don’t come in contact. Try to remove the circuit before doing anything. 

Step 2: Remove the batteries

Take out the batteries for not less than two minutes. Doing so gives the device enough time to reset.

Step 3: Fixing back the components

When the two minutes are over, return the wires, batteries, and cover plate. Remember to insert the two wires correctly for a robust connection. 

5. 12-inch Emerson Touchscreen Thermostat Blue Series12-inch Emerson Touchscreen Thermostat Blue Series

This series has programmable and backlight models and non-programmable ones. Such models are suitable for multistage and single multistage, and heat pump systems, and universal.

Below are some of the models that fall under this category;

  • 1F97-1277
  • 1F95-1280
  • 1F95-1291
  • 1F95-1277

Indefinite Hold Reset

This reset technique is helpful after the thermostat sticks on hold. Fix the issue by pressing the ‘run schedule button’ to retain its normal workability. 

Hard Reset steps 

Sometimes your thermostat’s display may be blank, making the device unresponsive. Don’t worry because you can tackle the challenge through hard resetting. Follow the following steps to do so.

Step one: detach the cover plate

You need to remove the plate to access the batteries. Return them after two or three minutes, allowing the system to reset.

Step 2: Replacing the batteries

If the batteries are entirely worn out, replace them; they might be the problem. Return the cover plate.

Step 3: Test the thermostat

Hopefully, your thermostat is operational. If the device is still misbehaving, seek the help of a professional. 

However, sometimes you may have to disconnect both the C and RC wires from their terminals. Besides, you need to ensure the circuit is disconnected before touching the wires. 

6. Classic 70 and 80 seriesClassic 70 and 80 series

The models that fall under this category include;

  • 1F78-144
  • 1F86-344
  • 1F79-111
  • 1F80-361
  • 1F85-277
  • 1F72-151
  • 1E78-151
  • 1F78-151

Factory reset (Method 1)

Step 1: Queuing the reset. This step is straightforward as you only need to hold the time key, down, and up arrow simultaneously. Hold them for not less than three seconds until the screen blanks. 

Step 2: Observe the screen for more information. The screen will blank and come back again. 

Factory reset (method 2)

Step 1: Starting the reset process. You need to press the down and up button arrow before rotating the OFF o HEAT setting switch. Do so while holding down the buttons. 

Step 2: Observe the confirmation screen. Just like in the first method, the display will go blank and come back. Be observant because when it comes back on, it is reset. 

7. Sensi Touch Smart ThermostatSensi Touch Smart Thermostat

This is one of the recently launched models from Emerson that comes with smart home integrations (SHI). The model can accommodate both Alexa and Google Home, and it features an HD touch screen. 

This category covers models like;

  • 1F95U-42WFB
  • 1F95U-42WF

Factory reset steps

Factory resetting such a model will clear out all Apple Home Kit or Wi-Fi connection parings. However, factor resetting can’t clear HVAC configurations. 

  1. Opening the interface. Press the menu button followed by ‘About Thermostat.’
  2. Factory resetting your thermostat. Press factory reset until the screen pops ‘all done.’

Schedule the reset

At what time do you intend to reset your thermostat? Resetting can either be early in the morning or late at night. 

Step 1: Setting a new routine. Press the menu button by clicking on the “schedule” button.

Step 2: Edit your thermostat’s configurations. Inspect to ensure the schedule is on before editing the formats as required. The next thing will be to save; don’t forget. If you have the Sensi app, use it for editing the forms.

8. Sensi Smart ThermostatSensi Smart Thermostat

This involves the 1F87U-42WF model

The Sensi Smart Thermostat is famous for its multiple features since you can utilize it alongside the cooling and heating systems. Besides, you can control the thermostat using Google Assistant, Siri, or Alexa. 

The gadget also boasts other essential tools like remote access, flexible scheduling, and gen-fencing. 

Scheduling the reset

  1. Follow the instructions. After clicking the ‘schedule’ button, follow the prompt on the screen. Sometimes it’s possible to use Sensi App for making necessary changes. 
  2. Save the changes. Saving is necessary to make sure the changes you made went through. Therefore, remember to save everything. 

FAQs

  • Why should I reset my White Rodger Thermostat?

Resetting a thermostat is necessary to curb challenges such as temperature errors that lead to poor temp readings. 

  • How can I set my thermostat for the weekend?

It’s simple, once the weekday schedule is over, the device will request you to command the same 4x, i.e., sleep, wake, leave, and return for the weekend. Adjust the temperatures and times using the ‘prgm’ or ‘set’ button. Initiate the changes by pressing the ‘RUN’ button.

you might be also interested to read: How to Adjust Hot Water Baseboard Heater

Final words

Due to multiple White Rodgers Thermostats, resetting can be a bit hectic. Choosing the appropriate method is the best option; based on the model you’re using. Please go through the above-listed models with their corresponding instructions. 

Leave a Reply

Your email address will not be published.

Recent Posts